|
| Model B49P POWER PLUS 4.98m (16ft. 4in.Reach) |
 |
| The mechanical parallel three point linkage B49P gives reach adjustment without constant adjustment to height. Standard with the 64hp Power Plus the 849P has the power to perform under any conditions. Power slew is available as an option, enabling transportation within the width of the tractor and the ability to cut into awkward areas. Single pump hydraulics are standard although the machine can be up graded to a twin pump build if required. The Trim-King cutting head features a fully adjustable front guard dull length rear rubber flap and choice of roller size. The top drive cast iron motor and triple polyester drive belts give minimum dead length to the end of the head and shock protection for the motor. The two speed drive system allows 2400 or 3000 rpm for professional verge mowing or hedgework. A choice of drop forged flails is available at no additional cost. To improve visibility on certain tractors a 15ft. forward bracket on the kingpost can be removed to bring the head forward. The high capacity oil tank of 227L (50gals) ensures maximum performance whilst prolonging oil and component life. Low friction cables are standard with the option of EPP proportional controls. |
|
Retail Euro Price
(Excluding VAT) |
|
| Model B49P POWER PLUS (including oil) | 17,419 |
| Optional Features | |
| EPP Controls Powerslew | +2299 |
| EPP Controls Non Powerslew models | + 2128 |
| Head flotation for fitting to EPP controls | + 335 |
| Hydraculation flat for grass mowing | + 482 |
| EPP arm rear mounting kit | + 171 |
| 1.5m flailhead (in lieu of 1.2m) | + 1418 |
| Hydraulic powerslew | + 990 |
| Cowl Wear Bar | + 194 |
| Rotor reversing valve kit | + 546 |
| 150m (6") roller in lieu of 1.15m (4.5") |
+ 93 |
| Subframe and axle brackets for additional stability (in lieu of linkage kit) | + 2049 |
| Road lighting kit | +272 |
| Twin pump | + 582 |
| Mid cut arm kit | + 1091 |
| Click here to return to Bomford index |