|
| Model B508 5.07m (16ft. 7in.Reach) |
 |
| The three-point linkage B508 is packed full of features. Suitable for tractors of 50hp and above 2100Kg The 52hp top mounted cast iron motor drives the Trim-Master cutting head complete with roller via twin belts at either 2400rpm or 3000rpm. The lower speed gives increased torque for grass mowing whilst the higher speed gives fine finish for hedge work. A choice of drop forged flails is available at no additional cost, to suit any working conditions. For maximum clearance when trimming over fences a top mounted second arm ram is fitted. Incorporated into the King Post is a manual slew, which gives either 15¡ slew for narrow lane work or 30¡ of slew for road transport within the width of most tractors. Safety breakaway protection is via a two way gravity link, which offers breakout both forwards and backwards. Semi independent hydraulics are standard but the machine can be fitted with the optional twin pump if desired. Operation of the machine is by low friction cables with the option of the EPP II Proportional control system. Available in left or right hand build. |
|
Retail Euro Price
(Excluding VAT) |
|
| Model B508 (including oil) | 15,031 |
| Optional Features | |
| Twin Pump Drive | +584 |
| EPP Controls (Twin Pump Non Slew Only) | +2216 |
| Hydracushion kit | + 503 |
| Rotor Reversing Kit (DSR) | + 569 |
| 150mm Roller (in lieu of 115mm) | + 96 |
| EPP Seat Mounting Kit | +178 |
| Cowl Wear Bar | + 203 |
| 'A' Frame Kit |
+512 |
| Debris Blower (Twin pump only) | + 1638 |
| Standard Duty 1.5m Cutter Bar (in lieu of 1.2m head) | - 332 |
| Click here to return to Bomford index |