|
| Model B81-81T 8.14m (26ft.8in.) Reach |
 |
| This telescopic two side cut machine reaches out to 8.14m (26'8") on either side of the tractor and is equipped with a 1.2m Flail Head, full length rear rubber flap and 150mm (6") roller. A top mounted cast iron motor is fitted to the Trim-King head and transmits its power via triple polyester corded notched V Belts. A feature of the belt drive is the ability to switch to the lower rotor shaft speed of 2400 rpm, which gives, increased torque for arduous conditions. A choice of drop forged flails are available at no additional cost to suit any mowing application. Dual pressure hydracushion arm float is fitted to relieve pressure off both the machine and the operator. Control of the machine is by DCU single lever proportional controls allowing precise fingertip operation. Machine is supplied complete with oil cooler to improve cutting performance and to extend the life of the 64hp hydraulic components. A full 180 degree of slew combined with safety breakaway system allows safe transportation within the width of the tractor and protection in the event of striking an obstruction. Suitable for tractors of 90hp and over 4600KG. |
|
Retail Euro Price
(Excluding VAT) |
|
|
Model B81-81T (including head & oil) |
59,360 |
| Optional Features | |
| 150mm roller in lieu of 115mm on 1.2m head | + 180 |
| 1.5m Pro Cut Flail Head in lieu of 1.2m head | + 1,980 |
| 1.5m (150mm roller) in lieu of 115mm on 1.2m head | + 255 |
| 1.2m ISMP head (150mm roller) in lieu of head | + 1,085 |
| Cowl Wear Bar | + 275 |
| Fitting | + 725 |
| DSR (rotor reversing kit / electric) | + 1,910 |
| Click here to return to Bomford index | |
| Click here for your nearest Bomford dealer in Ireland | |
| Click here to email us for a brochure |