Strautmann silage grabs
- really good value

If you're looking for a new silage grab, you'll not find better value for money than in our new Strautmann range of bucket type grabs and shear grabs. Here's a summary of the key features:

'All-Grip' bucket type hydraulic grabs

  • WELL-PRICED - from only 2,620 Euro rrp.
  • GERMAN QUALITY ENGINEERING - Hardox digging edge, thick plate fabrication with heavy tubular frame - built to last.
  • FOUR SIZES - choose from the 4-tine GS1500 1.52m wide; 0.85cu.m capacity to the 1.27cu.m capacity GS2300 7-tine with a 2.32m width - the width of some yard tractors.
  • STRONG TINES - damage resistant high tensile alloy steel tines - outer tines and ram pivot point is one-piece fabrication
  • BIG JAWS - with a 1.25m opening distance, these grabs can soon load your diet feeder. Bucket lip reaches to back wall with tines raised. Outer tines only 4in from side wall - leaves a clean pit floor.
  • LOW POWER REQUIREMENT - just 60-90hp depending on the model.
  • COMPLETE WITH QUICK-FIT BRACKETS - fits front loaders with EEC standard quick-hitch frame.

Shear type hydraulic grabs

  • CAN CUT A BLOCK IN 8 SECONDS - silage blocks can be cut in between 8 and 12 seconds - depending on the material. Leaves a well-sealed smooth pit face.
  • THREE WIDTHS/LOW POWER REQUIREMENT - 1.37m (0.95cu.m cap) 1.58m (1.1cu.m cap) 1.79 (1.25cu.m cap). Power requirement 70-90hp depending on model.
  • BOLT-ON - V-shaped cutters on the front edge and smooth cutters on the side of the shear can be easily replaced over time.
  • CLOSE-SPACED FLOOR TINES - easily bear the block weight. Outer tines are damage resistant high tensile steel. Heavy tine housing has secure conical seatings.

E-MAIL US NOW FOR A COPY OF OUR GRABS PRICE LIST