Most heads offer a choice of flails and ability to adjust rotor speed to suit verge or hedge.
See the Range
A professional range of machines designed for smaller, lightweight tractors. Requiring only a mass of 4900kg for the tractor, this range of arm mowers really gives the contractor true flexibility.
The 3 arm arrangement gives a versatile reach characteristic, allowing cutting over obstacles such as fences and guard rails.
Key Features
- 7.1m or 8m reach
- 1.2m or 1.5m cutting heads
- Oil cooled as standard
- ICS fully proportional control
Product Specifications
Standard = Standard Optional = Optional Not Available = Not Available
| Model | 7.1m (23’7″) | 8.0m (26’3″) |
|---|---|---|
Tractor Requirements |
||
| Minimum horse power | 120hp | 140hp |
| Minimum weight | 4900kg / 10803lbs | 5200kg / 11464lbs |
Base Unit Mounting Options |
||
| Front mount | Not Available | Not Available |
| Mid-mount | Not Available | Not Available |
| Rear mount | Standard | Standard |
| Three point linkage (CAT II) | Not Available | Not Available |
| Axle bracket | Standard | Standard |
Overall machine parameters |
||
| Machine weight with head and oil | 2290kg / 5049lbs | 2490kg / 5490lbs |
| Capacity of oil tank | 250 Litres / 66USG | 250 Litres / 66USG |
| Weight of machine with oil but without head | 2000kg / 4409lbs | 2200kg / 4850lbs |
Controls |
||
| Cable control (CC) | Optional | Optional |
| Low pressure hydraulics (LPH) | Not Available | Not Available |
| Electronic proportional control (EPP) | Optional | Optional |
| Intelligent control system (ICS) | Standard | Standard |
| Cable rotor reverse | Standard | Standard |
| Electronic rotor reverse | Optional | Optional |
Hydraulic system |
||
| System capability | 74 hp | 74hp |
| Pump flow rate | 125 Litres / 33USG | 125 Litres / 33USG |
| Pump type (Gear / Piston / Helical) | Gear | Gear |
| Pump arrangement (Twin / In-line) | Twin | Twin |
| Independent hydraulics | Standard | Standard |
| Oil cooler | Standard | Standard |
Arm features and main frame |
||
| Forward arm | [S] | [S] |
| Telescopic arm | [NA] | [NA] |
| Telescopic arm stroke | [NA] | [NA] |
| Power slew | [S] | [S] |
| Power slew angle | 110° | 110° |
| Gravity breakout protection | [NA] | [NA] |
| Hydraulic breakout protection | [S] | [S] |
| Arm float – Manual operation | [NA] | [NA] |
| Arm float – Electronic operation | [S] | [S] |
| Head float – Manual operation | [O] | [O] |
| Head float – Electronic operation | [S] | [S] |
| Left hand cutting | [O] | [O] |
| Right hand cutting | [O] | [O] |
| Left and right hand cutting | [S] | [S] |
Arm attachments available |
||
| Variable track bracket (VTB) | Optional | Optional |
| Sheartrim cutter bar | Optional | Optional |
| Pro-Saw | Optional | Optional |
| Ditch cleaner | Optional | Optional |
| Rotary head | Optional | Optional |
Accessories |
||
| Road Lights | [NA] | [NA] |
| Debris Blower | [NA] | [NA] |
| Warning Arrow (Magnetic / Fixed) | Optional | Optional |
| Cab Guard Kit | Standard | Standard |
Cutting Heads |
||
| 1.2m Pro-Cut with 115mm Roller | Optional | Optional |
| 1.2m Pro-Cut with 150mm Roller | Optional | Optional |
| 1.5m Pro-Cut with 115mm Roller | Optional | Optional |
| 1.5m Pro-Cut with 150mm Roller | Optional | Optional |
| 1.2m Pro-Cut ISMP with 115mm Roller | Optional | Optional |
| 1.2m Pro-Cut ISMP with 150mm Roller | Optional | Optional |
Flails
See the table below to see which flail heads are available for the different cutting heads listed above.
| BB | MP44 | HS60 | Pro Flail | T40 | T60 | True Cut | Bushmaster | |
|---|---|---|---|---|---|---|---|---|
| 1.2m Pro-Cut with 115mm roller | Optional | Optional | Optional | Optional | Optional | Optional | Optional | Optional |
| 1.2m Pro-Cut with 150mm roller | Optional | Optional | Optional | Optional | Optional | Optional | Optional | Optional |
| 1.5m Pro-Cut with 115mm roller | Optional | Optional | Optional | Optional | Optional | Optional | Optional | Optional |
| 1.5m Pro-Cut with 150mm roller | Optional | Optional | Optional | Optional | Optional | Optional | Optional | Optional |
| 1.2m Pro-Cut ISMP with 115mm roller | Optional | Optional | Optional | Optional | Optional | Optional | Optional | Optional |
| 1.2m Pro-Cut ISMP with 150mm roller | Optional | Optional | Optional | Optional | Optional | Optional | Optional | Optional |
Fittings & Add-ons
There are a number of fittings and add-ons available for this model. Click on the links below to find out more about the specific items available.
Need help chosing the right machine for you?
Contact our sales team now
IAM Sales
+353 (0) 56 7765826
Martin Owens
+353 (0) 87 9061920
Michael Brennan
+353 (0) 87 1248403
Working Reach Dimensions
Head used to calculations: 1.2 Pro Cut
| 7.1m (23’7″) | 8.0m (26’3″) | |||
|---|---|---|---|---|
| A | 7.1m | 23’7″ | 8.0m | 26’3″ |
| B | 6.95m | 23′ | 7.85m | 25’9″ |
| C | 5.27m | 17’3″ | 6.17m | 20’3″ |
| D | 4.75m | 15’5″ | 5.65m | 18’6″ |
| E | 8.26m | 26’3″ | 8.9m | 29’2″ |
| X | 1.35m | 4’7″ | 1.35m | 4’7″ |
| Y | 1.0m | 3’3″ | 1.0m | 3’3″ |