IAM
Phone 00353 (0) 56 7765826
The Hawk Evo VFA (Variable Forward Arm) is perfect for contractors and municipal environments, where the added benefits of a forward arm is required to improve visibility.
With a maximum reach of 6m, the Hawk Evo VFA can cope with every job it is tasked with. The impressive 1.8m maximum travel on the variable forward arm (VFA) gives 1.6m forward working.
Key Features:
- 6.0m reach
- Over 1.8m traverse on variable forward arm
- Heavy duty linkage or axle bracket mounted
- 125 l/min independent system
Product Specifications
Standard = Standard Optional = Optional Not Available = Not Available
| Model | 6.0m VFA (19’8) |
|---|---|
Tractor Requirements |
|
| Minimum horse power | 80hp |
| Minimum weight | 5000kg / 11023Lbs |
Base Unit Mounting Options |
|
| Front mount | Not Available |
| Mid-mount | Not Available |
| Rear mount | Standard |
| Three point linkage (CAT II) | Standard |
| Axle bracket | Optional |
Overall machine parameters |
|
| Machine weight with head and oil | 1860kg / 4100Lbs |
| Capacity of oil tank | 200 Litres / 52.8USG |
| Weight of machine with oil but without head | 1600kg / 3527Lbs |
Controls |
|
| Cable control (CC) | Not Available |
| Low pressure hydraulics (LPH) | Not Available |
| Electronic proportional control (EPP) | Optional |
| Intelligent control system (ICS) | Optional |
| Cable rotor reverse | Optional |
| Electronic rotor reverse | Optional |
Hydraulic system |
|
| System capacbility | 74 hp |
| Pump flow rate | 125 Litres / 33USG |
| Pump type (Gear / Piston / Helical) | Gear |
| Pump arrangement (Twin / Tandem Inline) | Twin |
| Independent hydraulics | Standard |
| Oil cooler | Standard |
Arm features and main frame |
|
| Forward arm | 1600mm / 5’3″ |
| Telescopic arm | Not Available |
| Telescopic arm stroke | Not Available |
| Power slew | Standard |
| Power slew angle | 94° |
| Gravity breakout protection | Not Available |
| Hydraulic breakout protection | Standard |
| Arm float – Manual operation | Optional |
| Arm float – Electronic operation | Optional |
| Head float – Manual operation | Optional |
| Head float – Electronic operation | Standard |
| Left hand cutting | Optional |
| Right hand cutting | Optional |
| Left and right hand cutting | Not Available |
Arm attachments available |
|
| Variable track bracket (VTB) | Optional |
| Sheartrim cutter bar | Optional |
| Pro-Saw | Optional |
| Ditch cleaner | Optional |
| Rotary head | Optional |
Accessories |
|
| Road lights | Standard |
| Debris blower | Optional |
| Cab guard kit | Standard |
Cutting Heads |
|
| 1.2m Pro-Trim with 115mm roller | Standard |
| 1.2m Pro-Trim with 150mm roller | Standard |
| 1.5m Pro-Trim with 115mm roller | Optional |
| 1.5m Pro-Trim with 150mm roller | Optional |
| 1.2m Pro-Trim ISMP with 115mm roller | Optional |
| 1.2m Pro-Trim ISMP with 150mm roller | Optional |
| 1.2m Pro-Cut with 115mm roller | Optional |
| 1.2m Pro-Cut with 150mm roller | Optional |
| 1.5m Pro-Cut with 115mm roller | Optional |
| 1.5m Pro-Cut with 150mm roller | Optional |
| 1.2m Pro-Cut ISMP with 115mm roller | Optional |
| 1.2m Pro-Cut ISMP with 150mm roller | Optional |
Flails
See the table below to see which flail heads are available for the different cutting heads listed above.
| BB | MP44 | HS60 | Pro Flail | T40 | T60 | True Cut | Bushmaster | |
|---|---|---|---|---|---|---|---|---|
| 1.2m Pro-Trim with 115mm roller | Optional | Optional | Optional | Optional | Optional | Optional | Optional | Not Available |
| 1.2m Pro-Trim with 150mm roller | Optional | Optional | Optional | Optional | Optional | Optional | Optional | Not Available |
| 1.2m Pro-Trim ISMP with 115mm roller | Optional | Optional | Optional | Optional | Optional | Optional | Optional | Standard |
| 1.2m Pro-Trim ISMP with 150mm roller | Optional | Optional | Optional | Optional | Optional | Optional | Optional | Standard |
| 1.5m Pro-Trim with 115mm roller | Optional | Optional | Optional | Optional | Optional | Optional | Optional | Not Available |
| 1.5m Pro-Trim with 150mm roller | Optional | Optional | Optional | Optional | Optional | Optional | Optional | Not Available |
| 1.2m Pro-Cut with 115mm roller | Optional | Optional | Optional | Optional | Optional | Optional | Optional | Optional |
| 1.2m Pro-Cut with 150mm roller | Optional | Optional | Optional | Optional | Optional | Optional | Optional | Optional |
| 1.5m Pro-Cut with 115mm roller | Optional | Optional | Optional | Optional | Optional | Optional | Optional | Optional |
| 1.5m Pro-Cut with 150mm roller | Optional | Optional | Optional | Optional | Optional | Optional | Optional | Optional |
| 1.2m Pro-Cut ISMP with 115mm roller | Optional | Optional | Optional | Optional | Optional | Optional | Optional | Optional |
| 1.2m Pro-Cut ISMP with 150mm roller | Optional | Optional | Optional | Optional | Optional | Optional | Optional | Optional |
Need help chosing the right machine for you?
CONTACT OUR SALES TEAM NOW
IAM Sales
Martin Owens
Niall Lavery
JP Hearn
Working Reach Dimensions
Head used to calculations: 1.2 Pro-Trim
| Side Reach – 6.0m VFA (19’8) | ||
|---|---|---|
| A | 6.0m | 19’8″ |
| B | 5.96m | 19’7″ |
| C | 4.18m | 13’9″ |
| D | 4.99m | 16’5″ |
| E | 6.16m | 20’3″ |
| X | 1.35m | 4’5″ |
| Y | 1.0m | 3’3″ |
| Forward Reach – 6.0m VFA (19’8) | ||
|---|---|---|
| A | 6.0m | 19’8″ |
| F | 5.39m | 17’8″ |
| G | 5.9m | 19’4″ |
| H | 1.6m | 5’3″ |
| J | 0.56m | 1’10” |