« Trailed Sprayers
COMMANDER
Commander
The COMMANDER is designed to meet the demands of the modern professional farmer. This generation of sprayers is designed to lead the way in capacity, reliability, safety, optimization, ease of operation and precision.
The COMMANDER is a highend performer designed for continuous use by demanding operators. An example of the functional design is the logical layout of the left hand side of the sprayer, where all primary operations are located.
Need help chosing the right machine for you?
CONTACT OUR SALES TEAM NOW
IAM Sales
Martin Owens
Niall Lavery
JP Hearn
« Commander
Features
Features
Work Zone
ChemFiller with integrated TurboFiller
Integrated TurboFiller is standard on COMMANDER.The deflector plate in the bottom of the induction bowl creates a rotating stream, which in combination with the powerful suction secures a high mixing capacity. By feeding the rotating stream from the bottom, the TurboFiller will never blog. Large external ejector system creates a powerful vacuum that transfers powders and liquid directly into the tank. The sturdy lid can be used as work table. Rotating nozzle used for cleaning containers and the Filler itself. The nozzle has a point that can penetrate the seal on most chemical containers. Size of hopper 35 l
SmartValve
All primary functions needed to operate the sprayer when filling or cleaning have been built into two handles located in the center of the work zone. The logically placed handles and the easy to read colour coded icons make the system very easy to understand and operate. Greatly reduces the start-up and operation time of the sprayer.
AutoFill
· Eases tank filling process
· Other tasks can be done
· Can set own volume
· Safety – no overfilling
· Start/Stop control is at the Fluid- Box near the work area
· Capacity: approximately 480 l/min
Optional Extras
· FastFiller – The high capacity FastFiller is capable of filling up to 800 l/min. The system is 100% self-priming. It works in combination with the ChemFiller, and simultaneous filling from both.
Chassis
SafeTrack
Narrow track width. Boom always perpendicular to the row ensuring optimal application. No pivot point between pump and manifold which reduces wear on hoses. The centre of gravity on the SafeTrack is further back from the “tipping line,” providing exceptional stability and performance. Steering radius is determined by forward speed ensuring an even higher degree of stability. Fast turns will result in reduced tracking angles but maintain the safety of the operation. Tight turning radius down to 6 m.
Suspended Axle & Drawbar
The drawbar on COMMANDER 5500 & 7000 is as standard fully suspended. The full up and down load from the sprayer to the tractor and transferred through rubber dampers built into the chassis. The drawbar on COMMANDER 5500 & 7000 furthermore has a hydraulic support leg as standard
Tanks
· Main tank – 3300 l, 4500 l, 5500 l and 7000 l
· Very durable UV protected Polyethylene
· Very durable UV protected Polyethylene
· Very low centre of gravity
· Efficient agitation
· Very deep central tank sump
· Easy to rinse inside with tank rinsing nozzles
· Smooth surface means the exterior is easily cleaned
· Rinse tank capacity 500 l
· Clean Water Tank 17 l
Liquid Systems
Dynamic Fluid 4
What is DynamicFluid4:
DynamicFluid4 is developed in terms of a faster regulation with highest possible accuracy.
The new liquid system works with a fast “feed forward” regulation valve to deal with all the challenges forced by tractor transmissions with stepless speed changes and the automatic ON/OFF functionality of modern sprayers.
The regulation valve is programmed to scope with different driving behaviours.
The regulation concept is designed with 4 different sensors. Together with the high precision, the 4 sensors are working as backup for each other. This results in high level of security and built-in reliability.
DynamicFluid4 Characterisitics & Benefits:
AutoSectionControl – inputs from sensors – e.g. shutting off sections
Wide regulation range from 0 – 500 l/min
Precise – Measuring and calculating 20 times/sec
Flexible – The regulation follows changes in speed when – e.g. passing obstacles in the field.
Fast response – Direct with no delay in the start-up and with the demanded dosage.
Thinking forward – At headlands the system is calculating and predicting the right dosage for entering the field again.
Up to 7 times faster than demands from the ISO/EN standards.
ISO standards call for +/- 10% from regulation set point after 7 seconds…
HARDI reaches +/- 10% after only 3.5 seconds and +/- 1% after 7 seconds
EasyClean filter
Dirt trap.
SafeSpray Vacuum gauge monitors filter condition.
Automatic main valve shut off when opening the lid.
Large surface area 581 cm2.
Flow capacity 450 l/min.
Cyclone Filter
Self-Cleaning.
Flow capacity 400 l/min.
No spills due to upright position.
3 postion boost valve: self-cleaning on, self-cleaning off and turbo boost for flushing the filter.
PrimeFlow
The controls are at the nozzle
Prevents sedimentation
Flushes boom lines without spraying
Pressure based system for trouble-free operation
Up to 13 sections are possible
Nozzles per boom section are freely configured
AutoWash – 2nd generation
Choose a program and the rest is automatic
Operator and tractor cabin not contaminated
Time saved as process is done from cabin
Effective controlled cleaning so pesticide cross-contamination avoided
3 programs from 2 to 25 minutes
-BoomFlush
-FastFlush
-MultiRinse – less than 2% residue with multirinse
AutoFill
Eases tank filling process
Other tasks can be done
Can set own volume
Safety – no overfilling
Start/Stop control is at the Fluid- Box near the work area
Capacity: approximately 480 l/min
Optional Extras
FastFiller – The high capacity FastFiller is capable of filling up to 800 l/min. The system is 100% self-priming. It works in combination with the ChemFiller, and simultaneous filling from both.
Booms
DELTA FORCE
DELTA FORCE is designed to be a large boom. The selection of features and the layout of the boom structure are targeted to perform at high driving speed and high performance at boom widths of 24-39 m. The result is a boom with many simple and strong solutions which together give a high-performing and reliable boom with a simple setup, low maintenance and a great design. Large booms able to drive at high speed while maintaining an optimum performance of the boom.
DELTA FORCE is only 255 cm wide in transport
DynamicCenter makes it possible to change the characteristics on the centre part, so the operator can find the best performance for his terrain and driving behaviour
Perfect suspension – pendulum suspension reduces boom movements to a minimum and the low center of gravity secures a perfect balance of the boom.
Fluid system with higher flow rates – the T22 boom fluid system can be fitted with either Triplet or Pentalet nozzle holders
TWIN FORCE
18-36 metres. Minimum drift – minimum volume and pesticide usage. Maximum capacity and performance. TWIN – the most tested and proven air assistance spraying system ever made. Boom suspension with hydraulic dampening, anti-yaw system and a patented HARDI adjustable guide rod system. Air speed of up to 35 m/s. Powerful dual 630 mm blowers provide up to 2,000 cubic metre/h/m boom. Unique features of angling the air and nozzles together. Stainless steel boom tubing is standard. TRIPLETS or QUADRILETS with non-drip valves and HARDI ISO nozzles. Even at high speed (15 – 25 km/h) the centre section offers superb boom performance.
TERRA FORCE
The TERRA FORCE boom is offering outstanding strength, performance and capacity. A 3-dimensional boom structure with a layout for only pushing and pulling forces secures optimal strength.
High performing yaw dampening: Hydro-pneumatic dampers combined with 4 polyurethane dampers give stability and minimum stress when turning and also for acceleration and deceleration. Partial fold and tilt suspension are options which secure optimal performance and flexibility. TERRA FORCE is available from 36-42 m.
TERRA FORCE booms are available on COMMANDER 5500 and 7000 l.
6- 42 m
TERRA FORCE offers the ultimate in robustness and performance.
DynamicCenter has manual adjustment of the centre characteristics. The setting is done on-the go from the cabin. It will change the boom from being 10% sprayer following (pendulum like) to be 80% sprayer following.
Partial fold and tilt suspension are options which secure optimal performance and flexibility.
Optional AutoTerrain is an automatic boom management system which works and reacts on both boom movements and twisting forces on the boom. This allows the AutoTerrain to be proactive and react on the cause more than on the symptom.
High performance yaw dampening is supplied by a double acting hydraulic damper.
Wide Paralift is hydraulically suspended.
DELTA
Boom suspension with coil spring pendulum, telescopic dampers and patented HARDI adjustable guide rod system
The 18-24 m DELTA boom is a compact high-performing boom built for the very demanding user. The boom has highly advanced suspension features, which in combination with the 3-dimensional boom design ensures most accurate application.
DELTA booms are only available on COMMANDER 3300 and 4500 l.
The centre section with coil spring pendulum and telescopic dampers absorbs the movements caused by the tractor and the trailer. The hydraulically activated pendulum lock stabilizes the boom whilst folding or unfolding.
An anti-yaw system dampens the forward and backward horizontal movements as well as any horizontal shock load.
18 – 24 m
3-dimensional high performance booms
Boom suspension with coil spring pendulum, telescopic dampers and patented HARDI adjustable guide rod system.
Anti-yaw device incorporated in the design
Mechanical lock between the intermediate and outer boom sections
LPY is operated by the tractor hydraulic outlets
LPZ is operated by electric/hydraulic, direct activated (DAH)
Polyethylene or stainless steel spray lines
TRIPLETS or QUADRILETS with non-drip valves
AutoTerrain
The AutoTerrain works and reacts on both boom movements and twisting forces on the boom. This allows the system to be proactive and react on the cause more than on the symptom.
AutoTerrain works with 5 ultrasonic sensors and three gyro sensors. Ultrasonic sensors are located at a given distance on the boom and measure the height of the crops multiple times per second.
The gyro sensors measure the boom, center part and the chassis angle. The information from the sensors is analyzed and processed in the AutoTerrain software – and the necessary corrections on the boom slant and tilt cylinders are quickly made, before the boom is getting out of balance or getting away from the measured crop height.
AutoTerrain maintains the set boom height following the ground like a magnet regardless of the terrain it travels across. This solution is gaining a lot of acceptance in broad-acre circles.
AutoTerrain is working with proportional hydraulics for precise and smooth control without jerks and hard movements.
If the computer system fails, the boom will continues in manual mode, providing increased reliability.
AutoSelect
- Nozzle change “on the go”
AutoSelect gives increased flexibility
HARDI introduces an air-driven nozzle concept at Agromek 2016, where the sprayer driver can change between 2 nozzles or use both at the same time. You can use one type of drift reducing nozzle at the headland or at sensitive buffer zones and a “conventional” flat fan nozzle or low drift nozzle in the field. The sprayer driver may also consider the wind conditions and change nozzle if it blows more than when the nozzle was chosen at the start of spraying.
Change between 4 different functions can take place:
- Spraying with nozzle A
- Spraying with nozzle B
- Spraying with both nozzle A+ B
- Auto mode – here AutoSelect can work with a pre-defined spraying pressure or pre-defined working speed
Good at changes of speed
If very big changes of the speed are needed, AutoSelect can automatically and quickly change between two nozzle sizes so the work of the individual nozzle is taken over by a bigger nozzle at increased speed and does not have to work in the outer areas for pressure or flow. This gives a better spray quality and a better application.
Changes of dosage during spraying
If you have to change the dosage in the field, this can be done by changing to a more suitable nozzle “on the go” without compromising on quality. AutoSelect is very identical with the set-up of the PrimeFlow which HARDI has so far offered the market and is not a replacement for PrimeFlow. 9 or 13 sections are possible. AutoSelect works with air pressure, and if you have a pneumatic braking system on your tractor, the air pressure source is secured.
AutoHeight & AutoSlant
HARDI AutoHeight system will control automatically the height, tilt and slant functions of the boom. This gives the driver a much easier control of the boom and the result will be a better spray application.
- Automatic boom height, tilt and slant corrections
- Choose between soil or crop mode
- Proportional valve for smooth movements
- 3 robust and precise ultrasonic sensors
- 2 angle sensors
- Optional 2 extra sensors for rough terrain
- Tested under rough conditions with more than 20 km/h
- HARDI AutoSlant system will control automatically the height and slant functions of the boom. This gives the driver a much easier control of the boom and the result will be a better spray application. It is a simpler system of the proven HARDI AutoHeight.
- Automatic boom height and slant corrections
- 2 robust and precise ultrasonic sensors
- Choose between soil or crop mode
- Integrated headland assist
AutoTerrain
The AutoTerrain works and reacts on both boom movements and twisting forces on the boom. This allows the system to be proactive and react on the cause more than on the symptom.
AutoTerrain works with 5 ultrasonic sensors and three gyro sensors. Ultrasonic sensors are located at a given distance on the boom and measure the height of the crops multiple times per second.
The gyro sensors measure the boom, center part and the chassis angle. The information from the sensors is analyzed and processed in the AutoTerrain software – and the necessary corrections on the boom slant and tilt cylinders are quickly made, before the boom is getting out of balance or getting away from the measured crop height.
AutoTerrain maintains the set boom height following the ground like a magnet regardless of the terrain it travels across. This solution is gaining a lot of acceptance in broad-acre circles.
AutoTerrain is working with proportional hydraulics for precise and smooth control without jerks and hard movements.
If the computer system fails, the boom will continues in manual mode, providing increased reliability.
Carbon Fibre (Delta Force)
Carbon-fiber helps the boom in many areas, primarily due to the low weight and the stiffness of the material which is one of its most distinguished strengths. The lower weight means that the center part gets fewer forces to control when the boom must be precisely controlled above the crop on rough ground. It is not much use to have a low weight, if there are an increased number of boom movements to be “tamed” in the anti-yaw damper and the center part; this will give a deteriorated spraying result.
Nozzles
In the HARDI nozzle range you will find nozzles for every spray job.
Nozzle type and size should balance the need for optimal biological effect with a consideration for wind drift & sprayer capacity.
Change nozzles every spring for optimum results.
Nozzle type and size should balance the need for optimal biological effect with a consideration for wind drift & sprayer capacity.
In the HARDI nozzle range you will find nozzles for every spray job.
HARDI nozzles can be fitted on all sprayer brands.
HeadLandAssist
With HeadLandAssist reduces operator stress and there is less chemical wastage at headlands:
Heading into Headland
Closes section valves after a programmed distance
Lifts boom to clear obstacles
Neutralises the slant
Re-entry into the field
Mirrors the slant
Lowers boom to previous height
Opens section valves after a programmed distance
Electronics
HC 6500
Designed specifically for spraying and easy to use.
Intuitive controls.
Safer, faster and easier with intelligent options.
Comfortable joystick for the most used functions .
Colour screen with excellent readability in sunlight and darkness. It shows six information windows.
All information available at a quick glance.
Help function that is always active so the operator is never in doubt.
HC 9600
Full control – integrated electronics
Colour screen with excellent readability in sunlight and darkness.
All the main spraying functions are operated with the finger-tip multifunction joystick in conjunction with HC 9500 12.1” touchscreen spray controller.
ISOBUS compatibility- HC 9600 offers compatibility with the ISO 11783 (ISOBUS) Virtual Terminal Standard, so the HC 9600 could also operate as the HC 6500.
The complete integration of all important information on one work screen, including AutoSteer, AutoHeight, AutoSectionControl, as well as guidance and dosing.
Easy to read graphical interface which easily shows you your boundaries and your already sprayed areas.
ISOBUS Compatible
The HARDI COMMANDER i sprayer can be operated with a virtual ISOBUS terminal. The customer can order an intelligent HARDI sprayer and use the intelligent functions like AutoWash and PrimeFlow direct from his own ISOBUS terminal.
To make the complex sprayer operation easier, the proven HARDI GRIP will be delivered with the COMMANDER i sprayer so all primary spray functions, such as on/off and section switches as well as the hydraulic operation can easily and safely take place by means of a joystick. Also a SetBox will be used to operate sprayer specific equipment as TWIN air assistance or SafeTrack steering directly.
Integrated AutoSectionControl
If the existing Virtual terminal has an automatic section control, following the de-fined task controller function of the ISOBUS standard, for example the John Deere Sprayer Pro, the ISOBUS terminal can operate the distribution valves of the COMMANDER, so the customer does not need a separate HARDI AutoSec-tionControl.
Updating
Existing COMMANDER i sprayers can be updated to an ISOBUS sprayer. That is also possible for sprayers which will now be ordered with the HARDI CONTROLLER 6500. The customer only has to buy the ISOBUS bridge, so the ISOBUS terminal can communicate with the HARDI jobcom.
ifunctions
SprayCircle
- The SprayCircle shows the spraying elements’ preparation, spraying and finishing and which intelligent features help in the daily work.
- The intelligence features of COMMANDER are much more than electronics. All functions involved before, under and after the spraying are optimized to make the operation as easy and efficient as possible to get the best possible result for the professional farmer.
PrimeFlow
The controls are at the nozzle
Prevents sedimentation
Flushes boom lines without spraying
Pressure based system for trouble-free operation
Up to 13 sections are possible
Nozzles per boom section are freely configured
AutoWash – 2nd generation
Choose a program and the rest is automatic.
Operator and tractor cabin not contaminated.
Time saved as process is done from cabin.
Effective controlled cleaning so pesticide cross-contamination avoided.
3 programs from 2 to 25 minutes
-BoomFlush
-FastFlush
-MultiRinse – less than 2% residue with multirinse
AutoFill
Eases tank filling process
Other tasks can be done
Can set own volume
Safety – no overfilling
Start/Stop control is at the Fluid- Box near the work area
Capacity: approximately 480 l/min
Optional Extras
FastFiller – The high capacity FastFiller is capable of filling up to 800 l/min. The system is 100% self-priming. It works in combination with the ChemFiller, and simultaneous filling from both.
AutoSectionControl
AutoSectionControl is a fully automatic GPS based system that opens and closes booms sections as necessary. ASC automatically records the area sprayed and in a typical situation where the headland is sprayed first, ASC automatically closes the sections if the operator passes over a sprayed area.
Product savings up to 5 % or more are documented
Operator fatigue is greatly reduced, especially in odd shaped fields
Precision shut-off can be individually set up.
AutoAgitation
AutoAgitation consists of an electrically operated flow valve and tank content sensor.
HC 9500 controls flow for the agitation. It is fully automatic.
With a full tank, AutoAgitation will ensure maximum agitation.
As the tank empties, the computer regulates the flow to prevent foam, and minimises liquid residues when the tank is empty.
When filling, AutoAgitation ensures maximum FastFiller capacity.
Automatic tank contents readout on the HC 9500
Different programs can be selected for optimal agitation
AutoAgitation is standard with AutoFill and AutoWash.
Need help chosing the right machine for you?
CONTACT OUR SALES TEAM NOW
IAM Sales
Martin Owens
Niall Lavery
JP Hearn
« Commander
Technical Data
Technical Data
RANGER >
| Boom | EAGLE | PRO |
| Tank, l (net) | 2500 | |
| Pumps, type – l/min | 1303 – 114 or 363 – 194 | |
| Booms, m | 18, 20, 21 | 12, 15, 16, 18, 20, 21, 24 |
| Hydraulic outlets needed (Y models) | 1 single + 1 double acting** | 1 single + 1 double acting** |
| Hydraulic outlets needed (Z models) | 1 double acting** | 1 double acting** |
| Weight drawbar (empty tank)*, kg | 200 | 160 |
| Weight axle (empty tank)*, kg | 1,540 | 1,820 |
| Weight total (empty tank)*, kg | 1,740 | 1,980 |
| Total length*, m | 5.40 / 5.53*** | 5.40 / 5,53*** |
| Total height*, m | 2.90 (11.2 × 38) | 3.61 (11.2 × 38) |
| Width with boom in transport position*, m | 2.98 | 2.55 |
| Track width, m | 1.50 – 2.00 | 1.50 – 2.00 |
| Length draw to axle, m | 3.95 | 3.95 |
| Ground clearance, m | 0.70 (11.2 × 38) | 0.70 (11.2 × 38) |
| RinseTank, l | 250 | 250 |
| * Measurements: EAGLE 18 m, PRO 24 m **Extra outlets needed for Slant on Y version, and for Slope correction *** No steer / steer |
||
NAVIGATOR >
| Tank, litres | 3000 | 4000 | 5000 | 6000 |
| Pumps, type – l/min | 364 -194 / 464 – 280 / 464H – 334 | |||
| Booms, m | DELTA 18-24 m EAGLE 18-30 m |
DELTA 18-24 m EAGLE 18-30 m DELTA FORCE 24/27/28/33/36 m |
DELTA 24 m EAGLE 24-30 m DELTA FORCE 24-39 |
DELTA 24 m EAGLE 24-30 m DELTA FORCE 24-39 m |
| Suspension | Optional | Optional | Optional | Optional |
| Tracking | Optional | Optional | Optional | Optional |
| Hydraulic outlets needed (Y models) ** | 1 single + 1 double acting | 1 single + 1 double acting | 1 single + 1 double acting | 1 single + 1 double acting |
| Hydraulic outlets needed (Z models) ** | 1 double acting | 1 double acting | 1 double acting | 1 double acting |
| Weight on drawbar (empty tank)*, kg | 280 | 460 | 400 | 475 |
| Weight axle (empty tank)*, kg | 3120 | 3020 | 4150 | 4712 |
| Weight total (empty tank)*, kg | 3400 | 3480 | 4550 | 5552 |
| Turning radius IntelliTrack, m | 6.0 | 6.0 | 8.5 | 8.5 |
| Total length, m | 7.21 | 7.21 | 8.0-9.35 | 8.0-9.35 |
| Total height, m (with DELTA boom) | 3.80 | 3.80 | 3.80 | 3.80 |
| Total height, m (with EAGLE) | 3.80 | 3.80 | 3.94 | 3.94 |
| Total height, m (with FORCE booms) | – | 3.80 | 3.80 | 3.80 |
| Width with EAGLE boom, m | 3.00 | 3.00 | 3.00 | 3.00 |
| Width with DELTA boom, m | 2.55 | 2.55 | 2.55 | 2.55 |
| Width with FORCE boom, m | – | 2.55 | 2.55 | 2.55 |
| Track width fixed axle, m | 1.80 / 2.00 | 1.80 / 2.00 | – | – |
| Track width adjustable axle, m | 1.50 – 2.25 | 1.50 – 2.25 | 1.80 – 2.25 | 1.80 – 2.25 |
| Length draw to axle, m | 4.61 | 4.61 | 5.45 | 5.45 |
| Clearance, m | 0.8 (13,6 × 48) | 0.8 (13,6 × 48) | 0.8 (13,6 × 48) | 0.8 (13,6 × 48) |
| RinseTank, l | 500 | 500 | 500 | 500 |
| Clean Water Tank, l | 20 | 20 | 20 | 20 |
| * Weight 3000 l is with 24 m EAGLE boom, 4000 l with 28 m DELTA-Z boom, 5000 l is with 30 m EAGLE boom, 6000 l with 30 m FORCE boom ** Minimum requirement. Extra function can require extra outlets. |
||||
COMMANDER >
| Tank, litres | 3300 | 4500 | 5500 | 7000 |
| Pumps, type – l/min | 464-280/464H-334 | 464-280/464H-334 | 464H-334/2×464-598 | 464H-334/2×464-598 |
| Booms, m | DELTA 18-24 m TWIN 18-30 m |
DELTA 18-24 m TWIN 18-36 m DELTA FORCE 27-39 m |
TWIN 24-36 m TERRA FORCE 36-42 m DELTA FORCE 27-39 m |
TWIN 24-36 m
TERRA FORCE 36-42 m |
| Hydraulic suspension | Optional | Optional | Optional | Standard |
| Suspended drawbar | – | – | Standard | Standard |
| Hydraulic outlets needed (Y models) | 1 single + 1 double acting | 1 single + 1 double acting | 1 single + 2 double acting | – |
| Hydraulic outlets needed (Z models) | 1 double acting | 1 double acting | 2 double acting | 2 double acting |
| Weight drawbar (empty tank) *, kg | 491 | 931 | 1117 | 1417 |
| Weight axle (empty tank) *, kg | 3343 | 4428 | 5512 | 5733 |
| Weight total (empty tank) *, kg | 3834 | 5159 | 6629 | 7150 |
| Turning radius SafeTrack, m | 6.00 | 6.20 | 9.00 | 9.00 |
| Total length, m | 7.30 | 7.80 | 8.50 | 8.50 |
| Total height, m | 3.60 (13.6×48) | 3.60 (13.6×48) | 3.95 (20.8×42) | 3.95 (20.8×42) |
| Width with DELTA boom, m | 2.55 | 2.55 | 2.55 | – |
| Width with DELTA FORCE boom, m | 2.55 | 2.55 | 3.00 | |
| Width with TWIN FORCE, m | 3.00 | 3.00 | 3.00 | 3.00 |
| Width with TERRA FORCE | – | – | 3.00 | 3.00 |
| Track width, m | 1.50-2.25 | 1.50-2.25 | 1.80-2.25 | 1.80-2.25 |
| Length draw to axel, m | 4.80 | 5.30 | 6.05 | 6.05 |
| Clearance, m | 0.8 (13.6×48) | 0.8 (13.6×48) | 0.78 (20.8×42) | 0.78 (20.8×42) |
| RinseTank | 500 | 500 | 500 | 500 |
| * Weight 3300 l with 24m DELTA boom, 4500 l with 28m TWIN boom, 5500 l with 24 m TWIN FORCE & 7000 l with 36m TERRA FORCE boom | ||||
AEON CENTURA >
| Booms | Booms DELTA FORCE 24-39 m | TWIN FORCE 24-30 m |
| Tank, nominal volume | 4200 / 5200 l | 4200 / 5200 l |
| Pump type – l/min | 464-280 / 464H-334 | 464-280 / 464H-334 |
| RinseTank (l) | 560 | |
| Clean water tank (l) | 40 | 560 |
| Height (m) * | 3.7 | 3.8 |
| Total length (m) B | 8.35 | 8.35 |
| Length draw to axle, (m) C 5.5 5.5 | 5.5 | 5.5 |
| Track width (m) D | 1.70-2.30 | 1.70-2.30 |
| Transport width (m) * E | 2.55 | 3 |
| Ground clearance axle (m) * F | 0.78 | 0.76 |
| Turning radius at 200 cm track width (m) | 6.3 | 6.3 |
| Working height (m) | 0.43-2.73 | 0.43-2.73 |
| Total weight empty (kg) | 6100 | 6400 |
| Total weight full (kg) | 11860 | 12160 |
| Drawbar load empty (kg) | 980 | 1000 |
| Drawbar load full (kg) | 2950 | 3000 |
| Comfort Track wheel steering | Standard | Standard |
| Hydraulic axle suspension Standard | Standard | Standard |
| Drawbar leaf-spring suspension Standard | Standard | Standard |
Need help chosing the right machine for you?
CONTACT OUR SALES TEAM NOW
IAM Sales
Martin Owens
Niall Lavery
JP Hearn
« Commander
Gallery
