« Trailed Sprayers
Navigator
Navigator
NAVIGATOR is synonymous with high quality and design which supports functionality. Properties which secure the value for money and ease of use. In the HARDI trailer family, NAVIGATOR offers features from mid-size to full specifi cation solutions.
The large range of high quality features makes the NAVIGATOR the obvious choice. Demands for simple and reliable solutions, serviceability and high capacity are universal world-wide. The product represents HARDI’s experience as sprayer specialist. The proven success for NAVIGATOR sprayers since the introduction has shown the value of this position.
Need help chosing the right machine for you?
CONTACT OUR SALES TEAM NOW
IAM Sales
Martin Owens
Niall Lavery
JP Hearn
« Navigator
Technical Data
Technical Data
RANGER >
| Boom | EAGLE | PRO |
| Tank, l (net) | 2500 | |
| Pumps, type – l/min | 1303 – 114 or 363 – 194 | |
| Booms, m | 18, 20, 21 | 12, 15, 16, 18, 20, 21, 24 |
| Hydraulic outlets needed (Y models) | 1 single + 1 double acting** | 1 single + 1 double acting** |
| Hydraulic outlets needed (Z models) | 1 double acting** | 1 double acting** |
| Weight drawbar (empty tank)*, kg | 200 | 160 |
| Weight axle (empty tank)*, kg | 1,540 | 1,820 |
| Weight total (empty tank)*, kg | 1,740 | 1,980 |
| Total length*, m | 5.40 / 5.53*** | 5.40 / 5,53*** |
| Total height*, m | 2.90 (11.2 × 38) | 3.61 (11.2 × 38) |
| Width with boom in transport position*, m | 2.98 | 2.55 |
| Track width, m | 1.50 – 2.00 | 1.50 – 2.00 |
| Length draw to axle, m | 3.95 | 3.95 |
| Ground clearance, m | 0.70 (11.2 × 38) | 0.70 (11.2 × 38) |
| RinseTank, l | 250 | 250 |
| * Measurements: EAGLE 18 m, PRO 24 m **Extra outlets needed for Slant on Y version, and for Slope correction *** No steer / steer |
||
NAVIGATOR >
| Tank, litres | 3000 | 4000 | 5000 | 6000 |
| Pumps, type – l/min | 364 -194 / 464 – 280 / 464H – 334 | |||
| Booms, m | DELTA 18-24 m EAGLE 18-30 m |
DELTA 18-24 m EAGLE 18-30 m DELTA FORCE 24/27/28/33/36 m |
DELTA 24 m EAGLE 24-30 m DELTA FORCE 24-39 |
DELTA 24 m EAGLE 24-30 m DELTA FORCE 24-39 m |
| Suspension | Optional | Optional | Optional | Optional |
| Tracking | Optional | Optional | Optional | Optional |
| Hydraulic outlets needed (Y models) ** | 1 single + 1 double acting | 1 single + 1 double acting | 1 single + 1 double acting | 1 single + 1 double acting |
| Hydraulic outlets needed (Z models) ** | 1 double acting | 1 double acting | 1 double acting | 1 double acting |
| Weight on drawbar (empty tank)*, kg | 280 | 460 | 400 | 475 |
| Weight axle (empty tank)*, kg | 3120 | 3020 | 4150 | 4712 |
| Weight total (empty tank)*, kg | 3400 | 3480 | 4550 | 5552 |
| Turning radius IntelliTrack, m | 6.0 | 6.0 | 8.5 | 8.5 |
| Total length, m | 7.21 | 7.21 | 8.0-9.35 | 8.0-9.35 |
| Total height, m (with DELTA boom) | 3.80 | 3.80 | 3.80 | 3.80 |
| Total height, m (with EAGLE) | 3.80 | 3.80 | 3.94 | 3.94 |
| Total height, m (with FORCE booms) | – | 3.80 | 3.80 | 3.80 |
| Width with EAGLE boom, m | 3.00 | 3.00 | 3.00 | 3.00 |
| Width with DELTA boom, m | 2.55 | 2.55 | 2.55 | 2.55 |
| Width with FORCE boom, m | – | 2.55 | 2.55 | 2.55 |
| Track width fixed axle, m | 1.80 / 2.00 | 1.80 / 2.00 | – | – |
| Track width adjustable axle, m | 1.50 – 2.25 | 1.50 – 2.25 | 1.80 – 2.25 | 1.80 – 2.25 |
| Length draw to axle, m | 4.61 | 4.61 | 5.45 | 5.45 |
| Clearance, m | 0.8 (13,6 × 48) | 0.8 (13,6 × 48) | 0.8 (13,6 × 48) | 0.8 (13,6 × 48) |
| RinseTank, l | 500 | 500 | 500 | 500 |
| Clean Water Tank, l | 20 | 20 | 20 | 20 |
| * Weight 3000 l is with 24 m EAGLE boom, 4000 l with 28 m DELTA-Z boom, 5000 l is with 30 m EAGLE boom, 6000 l with 30 m FORCE boom ** Minimum requirement. Extra function can require extra outlets. |
||||
COMMANDER >
| Tank, litres | 3300 | 4500 | 5500 | 7000 |
| Pumps, type – l/min | 464-280/464H-334 | 464-280/464H-334 | 464H-334/2×464-598 | 464H-334/2×464-598 |
| Booms, m | DELTA 18-24 m TWIN 18-30 m |
DELTA 18-24 m TWIN 18-36 m DELTA FORCE 27-39 m |
TWIN 24-36 m TERRA FORCE 36-42 m DELTA FORCE 27-39 m |
TWIN 24-36 m
TERRA FORCE 36-42 m |
| Hydraulic suspension | Optional | Optional | Optional | Standard |
| Suspended drawbar | – | – | Standard | Standard |
| Hydraulic outlets needed (Y models) | 1 single + 1 double acting | 1 single + 1 double acting | 1 single + 2 double acting | – |
| Hydraulic outlets needed (Z models) | 1 double acting | 1 double acting | 2 double acting | 2 double acting |
| Weight drawbar (empty tank) *, kg | 491 | 931 | 1117 | 1417 |
| Weight axle (empty tank) *, kg | 3343 | 4428 | 5512 | 5733 |
| Weight total (empty tank) *, kg | 3834 | 5159 | 6629 | 7150 |
| Turning radius SafeTrack, m | 6.00 | 6.20 | 9.00 | 9.00 |
| Total length, m | 7.30 | 7.80 | 8.50 | 8.50 |
| Total height, m | 3.60 (13.6×48) | 3.60 (13.6×48) | 3.95 (20.8×42) | 3.95 (20.8×42) |
| Width with DELTA boom, m | 2.55 | 2.55 | 2.55 | – |
| Width with DELTA FORCE boom, m | 2.55 | 2.55 | 3.00 | |
| Width with TWIN FORCE, m | 3.00 | 3.00 | 3.00 | 3.00 |
| Width with TERRA FORCE | – | – | 3.00 | 3.00 |
| Track width, m | 1.50-2.25 | 1.50-2.25 | 1.80-2.25 | 1.80-2.25 |
| Length draw to axel, m | 4.80 | 5.30 | 6.05 | 6.05 |
| Clearance, m | 0.8 (13.6×48) | 0.8 (13.6×48) | 0.78 (20.8×42) | 0.78 (20.8×42) |
| RinseTank | 500 | 500 | 500 | 500 |
| * Weight 3300 l with 24m DELTA boom, 4500 l with 28m TWIN boom, 5500 l with 24 m TWIN FORCE & 7000 l with 36m TERRA FORCE boom | ||||
AEON CENTURA >
| Booms | Booms DELTA FORCE 24-39 m | TWIN FORCE 24-30 m |
| Tank, nominal volume | 4200 / 5200 l | 4200 / 5200 l |
| Pump type – l/min | 464-280 / 464H-334 | 464-280 / 464H-334 |
| RinseTank (l) | 560 | |
| Clean water tank (l) | 40 | 560 |
| Height (m) * | 3.7 | 3.8 |
| Total length (m) B | 8.35 | 8.35 |
| Length draw to axle, (m) C 5.5 5.5 | 5.5 | 5.5 |
| Track width (m) D | 1.70-2.30 | 1.70-2.30 |
| Transport width (m) * E | 2.55 | 3 |
| Ground clearance axle (m) * F | 0.78 | 0.76 |
| Turning radius at 200 cm track width (m) | 6.3 | 6.3 |
| Working height (m) | 0.43-2.73 | 0.43-2.73 |
| Total weight empty (kg) | 6100 | 6400 |
| Total weight full (kg) | 11860 | 12160 |
| Drawbar load empty (kg) | 980 | 1000 |
| Drawbar load full (kg) | 2950 | 3000 |
| Comfort Track wheel steering | Standard | Standard |
| Hydraulic axle suspension Standard | Standard | Standard |
| Drawbar leaf-spring suspension Standard | Standard | Standard |
Need help chosing the right machine for you?
CONTACT OUR SALES TEAM NOW
IAM Sales
Martin Owens
Niall Lavery
JP Hearn
« Navigator
Features
Features
Work Zone
Filling
The NAVIGATOR is available with two filling devices, PumpFiller or FastFiller
Both systems use a heavy-duty aluminium coupling.
1. PumpFiller – Uses suction capacity of the pump for filling.
2. FastFiller –Capable of filling up to 500 l/min.100 % self-priming.
TurboFiller
The HARDI TurboFiller is able to handle large quantities of powders and liquids. Its high capacity is achieved through a combination of high vacuum and liquid rotation inside the hopper. TurboFiller uses high pressure rotating liquid to completely mix the powder and liquid chemicals before they are sucked into the sprayer. High mixing capacity. Very high vacuum and suction capacity.
Rotating nozzle used for cleaning containers and the TurboFiller itself. 1 m. cleaning pipe
SmartValve
All primary functions needed for filling or cleaning the sprayer are built into two handles located in the center of the working zone. The logically placed handles with easy-to-read icons make the system very intuitively to operate and greatly reduce the start-up and operation time of the sprayer.
Chasis
Excellent Clearance
The unique design of axle and frame ensures excellent crop clearance, reducing crop damage to the absolute minimum.
No brake rods or steering components are lower than the axle.
The NAVIGATOR has the lowest possible center of gravity without compromising clearance under the sprayer. Excellent crop clearance, 70-80 cm. Low center of gravity.
Surface Treatment
The chassis and all other steel components have been pre-treated with zinc phosphate before the application of a high-quality coating of powder paint.
UV protected.
13 steps of cleaning, degreasing and preparation.
Hardening at 200°C for one hour.
Will last at least 1000 hours in salt fog test, without any corrosion.
IntelliTrack
IntelliTrack is a high end steering drawbar concept which combines the advantages of an excellent designed chassis with the use of advanced electronics. In the tracked version the drawbar is divided in two – a rear part fixed on the frame and a moveable front part. This concept ensures the best possible geometry for stability and the hydraulic system. Dynamic Electronic Control is an integrated safety feature which doesn’t allow the cylinders to steer the drawbar when the driving speed is too high for the given track width. Easy connection to Tractor. Automatic drawbar transport lock. 6.0 metre turning radius.
Tanks
All Tanks are made from UV protected polyethylene. They have a very flat surface and no inside walls.
Main Tank
- Capacity in litres – Nominal (Maximum): 3000 (3350), 4000 (4450) 5000 (5350), 6000 (6450)
- Very low center of gravity
- Efficient agitation
- Very deep central tank sump
- Easy to rinse inside with tank rinsing
RinseTank
- Capacity – 500 l
- Adequate liquid for both outside & inside cleaning
- Placed on axle for added stability
- Level indicator
Clean Water Tank
- Capacity – 20 l
- Well integrated into the front cover
- Easy filling from the platform
Liquid Systems
Dynamic Fluid 4
What is DynamicFluid4:
DynamicFluid4 is developed in terms of a faster regulation with highest possible accuracy.The new liquid system works with a fast “feed forward” regulation valve to deal with all the challenges forced by tractor transmissions with stepless speed changes and the automatic ON/OFF functionality of modern sprayers. The regulation valve is programmed to scope with different driving behaviours. The regulation concept is designed with 4 different sensors. Together with the high precision, the 4 sensors are working as backup for each other. This results in high level of security and built-in reliability.
DynamicFluid4 Characterisitics & Benefits:
- AutoSectionControl – inputs from sensors – e.g. shutting off sectionsWide regulation range from 0 – 500 l/minPrecise – Measuring and calculating 20 times/secFlexible – The regulation follows changes in speed when – e.g. passing obstacles in the fieldFast response – Direct with no delay in the start-up and with the demanded dosageThinking forward – At headlands the system is calculating and predicting the right dosage for entering the field againUp to 7 times faster than demands from the ISO/EN standardsISO standards call for +/- 10% from regulation set point after 7 seconds…
HARDI reaches +/- 10% after only 3.5 seconds and +/- 1% after 7 seconds
Cyclone Filter
The HARDI CycloneFilter is a unique self-cleaning pressure filter. The cyclone created inside the filter increases the speed of the liquid against the filter screen, thereby increasing the effectiveness of the self-cleaning action.
Easy Clean Filter
EasyClean Filter is a high capacity suction filter with a very large filter surface.
The external SafeSpray gauge monitors the the filter ensuring the filter is only cleaned when needed. When opening the lid, the main valve is automatically turned off. Dirt traps inside the filter ensure impurities are removed from the system.
Boom Prime
BoomPrime is a low-pressure circulation system for booms. The spray liquid can circulate to the nozzles before the actual spraying starts. It prevents sedimentation and permits flushing of the boom lines without spraying onto the ground.
Every section has an even pressure valve, ensuring that the pressure in the sections is never higher than 0.7 bar, so that the non-drip valves will not open.
No untreated areas at spray start.
No pesticide sedimentation in the spray lines.
Positive pressure-based system to ease trouble-shooting.
Dilution Kit
The HARDI NAVIGATOR can be equipped with a DilutionKit, allowing the operator to flush the liquid system from the driver’s seat. The operator can flush only the boom or rinse the tank with the flush nozzles. The need of rinse water is reduced due to the optimized liquid system. All return lines and agitation will be flushed when spraying out the diluted liquid from the main tank.
Booms
AutoSectionControl
AutoSectionControl is a fully automatic GPS based system that opens and closes booms sections as necessary. ASC automatically records the area sprayed and in a typical situation where the headland is sprayed first, ASC automatically closes the sections if the operator passes over a sprayed area.
Product savings up to 5 % or more are documented.
Operator fatigue is greatly reduced, especially in odd shaped fields.
Precision shut-off can be individually set up.
DELTA FORCE
DELTA FORCE is designed to be a large boom. The selection of features and the layout of the boom structure are targeted to perform at high driving speed and high performance at boom widths of 24-39 m. The result is a boom with many simple and strong solutions which together give a high-performing and reliable boom with a simple setup, low maintenance and a great design. A very advanced, but yet simple centre part controls the movements of the DELTA FORCE boom. The five pendulum settings allow to adjust the boom performance, either to a pendulum, which follows the sprayer movements, or to follow the level of the terrain.
HARDI DELTA FORCE is available in:
3-fold: 39/27/15 m, 36/27/15 m, 36/24/13 m, 33/25/15 m, 32/25/15 m.
2-fold: 30/15 m, 28/14 m, 27/14 m.
Eagle
The 18-30m EAGLE boom is designed for heavy-duty use under the most demanding conditions and minimum service.The EAGLE boom is suspended on two large coil springs with shock absorbers. The horizontal movements are controlled by a heavy-duty trapeze system that allows spraying and turning at very high working speeds. 2-dimensional boom offering unequalled performance in rough conditions and fast spraying speeds. Adjustable nozzle holders. Self-stabilizing trapeze suspension.
DELTA
The 18-24 m DELTA boom is a compact, high-performing boom. The boom has highly advanced suspension features, which in combination with the three-dimensional boom design ensures accurate application. The centre section with coil spring pendulum and telescopic dampers absorbs the movements caused by the tractor and the trailer. The hydraulically activated pendulum lock stabilizes the boom whilst folding or unfolding. An anti-yaw system dampens the forward and backward horizontal movements as well as any horizontal shock load.
AutoHeight & AutoSlant
HARDI AutoHeight system will control automatically the height, tilt and slant functions of the boom. This gives the driver a much easier control of the boom and the result will be a better spray application.
- Automatic boom height, tilt and slant corrections
- Choose between soil or crop mode
- Proportional valve for smooth movements
- 3 robust and precise ultrasonic sensors
- 2 angle sensors
- Optional 2 extra sensors for rough terrain
- Tested under rough conditions with more than 20 km/h.
- HARDI AutoSlant system will control automatically the height and slant functions of the boom. This gives the driver a much easier control of the boom and the result will be a better spray application. It is a simpler system of the proven HARDI AutoHeight.
- Automatic boom height and slant corrections
- 2 robust and precise ultrasonic sensors
- Choose between soil or crop mode.
- Integrated headland assist
AutoTerrain
The AutoTerrain works and reacts on both boom movements and twisting forces on the boom. This allows the system to be proactive and react on the cause more than on the symptom. AutoTerrain works with 5 ultrasonic sensors and three gyro sensors. Ultrasonic sensors are located at a given distance on the boom and measure the height of the crops multiple times per second. The gyro sensors measure the boom, center part and the chassis angle. The information from the sensors is analyzed and processed in the AutoTerrain software – and the necessary corrections on the boom slant and tilt cylinders are quickly made, before the boom is getting out of balance or getting away from the measured crop height. AutoTerrain maintains the set boom height following the ground like a magnet regardless of the terrain it travels across. This solution is gaining a lot of acceptance in broad-acre circles. AutoTerrain is working with proportional hydraulics for precise and smooth control without jerks and hard movements. If the computer system fails, the boom will continues in manual mode, providing increased reliability.
Carbon Fibre (Delta Force)
Carbon-fiber helps the boom in many areas, primarily due to the low weight and the stiffness of the material which is one of its most distinguished strengths. The lower weight means that the center part gets fewer forces to control when the boom must be precisely controlled above the crop on rough ground. It is not much use to have a low weight, if there are an increased number of boom movements to be “tamed” in the anti-yaw damper and the center part; this will give a deteriorated spraying result.
AutoSelect
Nozzle change “on the go”
AutoSelect gives increased flexibility
HARDI introduces an air-driven nozzle concept at Agromek 2016, where the sprayer driver can change between 2 nozzles or use both at the same time. You can use one type of drift reducing nozzle at the headland or at sensitive buffer zones and a “conventional” flat fan nozzle or low drift nozzle in the field. The sprayer driver may also consider the wind conditions and change nozzle if it blows more than when the nozzle was chosen at the start of spraying.
Change between 4 different functions can take place:
- Spraying with nozzle A
- Spraying with nozzle B
- Spraying with both nozzle A+ B
- Auto mode – here AutoSelect can work with a pre-defined spraying pressure or pre-defined working speed
Good at changes of speed
If very big changes of the speed are needed, AutoSelect can automatically and quickly change between two nozzle sizes so the work of the individual nozzle is taken over by a bigger nozzle at increased speed and does not have to work in the outer areas for pressure or flow. This gives a better spray quality and a better application.
Changes of dosage during spraying
If you have to change the dosage in the field, this can be done by changing to a more suitable nozzle “on the go” without compromising on quality. AutoSelect is very identical with the set-up of the PrimeFlow which HARDI has so far offered the market and is not a replacement for PrimeFlow. 9 or 13 sections are possible. AutoSelect works with air pressure, and if you have a pneumatic braking system on your tractor, the air pressure source is secured
Electronics
HC 5500
Advanced farming ready with up to 98 registers.
Connection possibility with a site specific application map or a remote sensor.
Operator is instantly informed of operation status and warned when vital parameters like pressure, speed, etc. are not correct.
Easy to read display for day or night use with 4 lines of information displayed simultaneously.
Short cut keys to display vital information.
Volume rate can be changed on the go.
The distance or area untreated is constantly calculated.
The basic sprayer functions can be operated without the computer.
HC 6500
Designed specifically for spraying and easy to use.
Intuitive controls.
Safer, faster and easier with intelligent options.
Comfortable joystick for the most used functions .
Colour screen with excellent readability in sunlight and darkness. It shows six information windows.
All information available at a quick glance.
Help function that is always active so the operator is never in doubt.
HC 9600
Full control – integrated electronics
Colour screen with excellent readability in sunlight and darkness.
All the main spraying functions are operated with the finger-tip multifunction joystick in conjunction with HC 9500 12.1” touchscreen spray controller.
ISOBUS compatibility- HC 9600 offers compatibility with the ISO 11783 (ISOBUS) Virtual Terminal Standard, so the HC 9600 could also operate as the HC 6500.
The complete integration of all important information on one work screen, including AutoSteer, AutoHeight, AutoSectionControl, as well as guidance and dosing.
Easy to read graphical interface which easily shows you your boundaries and your already sprayed areas.
SprayRover 570 & AutoSectionControl
The SprayRover 570 is a stand-alone AutoSectionControl which can work in combination with the well-known HC 5500 controller.
The 5.7” (14.5 cm) colour touchscreen display has a resolution of 320 x 240 pixel. It can be used in 2D or 3D graphic.
The SprayRover 570 offers Guidance with five different guidance modes.
Need help chosing the right machine for you?
CONTACT OUR SALES TEAM NOW
IAM Sales
Martin Owens
Niall Lavery
JP Hearn
« Navigator
Gallery
