A video guide on how to set additional guide wheels for your Strautmann Machine.
For more handy hints on Strautmann machines, check out what else the academy has.
Remove the Split-pin at the locating bolt.
Lift the adjusting spindle from the locating bolt.
Turn the adjust spindle
Place the adjusting spindle again onto the bolt and secure it by means of the split-pin.
Repeat the procedure on the other side.
**Attention! Do not change the factory setting of the stop screw. It prevents the guide wheels from colliding with the CFS drum**
**Please read the detailed operating instruction carefully. Always observe the safety instruction**
Contact IAM today for further information.